Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Miami Owner’s Guide
We stock and install CWS-compatible driveway and paver components across Miami, with most driveway paver installations running $8,260 – $21,240 depending on square footage, base prep, and paver line. If you’re looking at a failed section, cracked border course, or sunken apron, we can usually get eyes on it within a day and give you a written number before anything gets torn up. Most Miami homeowners discover the problem after a heavy rain, when a paver sinks enough that water pools against the garage slab or a corner unit cracks under repeated tire load.
This page is specifically for CWS product owners trying to figure out what failed, what it costs to fix, and whether the part can be matched. We’re an independent service provider in Miami, not affiliated with CWS, but we work with their paver and driveway systems regularly, including matching discontinued color blends and older series units.
Which CWS Models This Applies To
CWS manufactures both segmental concrete pavers and slab systems, and the compatibility question usually comes down to what’s stamped on the underside of an existing unit or what’s written on the original project invoice. Most CWS driveway pavers in Miami are 60mm or 80mm thick, which matters more than the face dimensions when you’re replacing partial sections. A 60mm unit under vehicle load will crack years earlier than the same profile at 80mm, and we see exactly that in Miami driveways where builders shaved material cost on the front end.
The OEM-versus-aftermarket decision for CWS comes down to color blend. CWS runs specific pigment mixes by series, and a quality aftermarket match from a local Miami supplier can get you within a shade, but not exact after five years of UV exposure. If the failed area is in a focal point (apron, walkway border, pool deck transition), we recommend pulling an intact unit from a less visible area and using the new units there, so the patch isn’t the first thing you see. Always check the underside for a series code and measure thickness with a caliper before ordering anything.
Styles & brands we work with
Signs Your CWS Driveway & Pavers Is Failing
- Settling or sinking in a defined area: This almost always points to base failure underneath, not the paver itself. Miami’s sandy soil plus heavy summer rain will wash fines out of an improperly compacted base, and the pavers go with it.
- Spider cracking or corner chipping on edge units: Edge restraints fail first on CWS driveways. Once the plastic or concrete edging lets go, outer pavers spread under tire load and crack at the corners.
- Color fading with white efflorescence: Salt air and humidity in Miami accelerate surface wear. Efflorescence isn’t structural, but it signals the paver’s surface sealer has broken down and moisture is moving through the unit.
- Water pooling against the garage slab: If the driveway was pitched incorrectly or the slab has settled, water backs up and eventually undermines the paver bedding layer. This is a grading issue, not a paver defect, and it’ll keep coming back until the pitch is corrected.
- Loose or wobbling pavers in the wheel path: The bedding sand has washed out or eroded. Driving on loose units accelerates edge chipping and cracking, so this should be addressed before it spreads to neighboring units.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full CWS paver driveway installation in Miami typically runs $8,260 – $21,240, with partial repairs and section replacements running less depending on square footage and base condition. The big cost drivers are paver thickness (60mm vs 80mm), whether the base stone needs removal and recompaction, and whether you’re in a neighborhood like Coconut Grove where access is tight and older driveways often have hidden root intrusion from mature trees. We write the price before work starts, and the number on day one is the number on the invoice.
Every paver job includes removal and disposal of failed material where needed, recompaction of the base, new bedding sand, paver installation, edge restraints, and polymeric sand in the joints. All work carries our 365-Day Done Right Promise: if it fails inside the guarantee period, we come back and fix it at no charge. That’s in writing on every job, and the free return visit applies if a repair fails, no service call fee.
DIY or Call Us?
Pavers aren’t high-voltage or high-tension, so there’s room for a careful homeowner here, but the safe DIY window is narrow. You can remove and re-set a single loose paver in a small area, sweep replacement sand, and inspect your edge restraints without special equipment. What you shouldn’t do is jackhammer out a settled section and rebuild the base yourself. Compaction depth, pitch, and drainage in Miami’s rainy season are the difference between a repair that lasts five years and one that fails before Thanksgiving. Give you a number first, then pick up the tools. If it’s more than a couple of units, call (850) 988-7559 and let us look at it.
FAQs
A properly installed CWS paver driveway in Miami lasts 20 – 30 years, but the joints and edge restraints typically need attention every 6 – 10 years because of Florida’s heat, humidity, and seasonal downpours. The pavers themselves rarely fail; it’s the system around them that gives out first. Call (850) 988-7559 if your driveway is settling or spreading at the edges.
A cracked paver cannot be structurally repaired; it needs replacement with a matching unit or one pulled from a less visible area. Doing this preserves the color blend without a visible patch. We can also color-match new units as closely as the existing batch allows. Call (850) 988-7559 for a written quote on the repair.
A typical CWS driveway section replacement takes one to two days for partial areas and three to five days for a full driveway, depending on base work and access. Older Miami neighborhoods with narrow driveways and tree roots add time. We’ll give you a defined arrival window before work starts, not a ‘sometime this week’ wave.
We stock common 60mm and 80mm gray and tan CWS-compatible units on the truck, but most color blends and series-specific units are ordered per job to match exactly. If you have the original product code or a paver we can measure, we can source it within a few days. Call (850) 988-7559 and we’ll tell you what it’ll take.
Written by Trevor Nash, Owner, Penhallow Remodeling Miami at Penhallow Remodeling Miami, serving Miami and nearby areas.
