Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Bathroom Remodeling: The Miami Owner’s Guide
Quikrete bathroom remodeling in Miami typically runs $10,620 – $33,040 installed, depending on shower size, substrate condition, and tile selection. We stock Quikrete-compatible materials and install them regularly throughout Dade County. Most homeowners discover they need us when tile starts cracking loose, grout keeps crumbling, or the shower pan leaks into the room below.
Here’s the thing about Quikrete products in a bathroom: the concrete and mortar itself rarely fails. What fails is what’s underneath it. In Miami’s humidity, a shower built over green board instead of cement board will eventually rot, swell, and take the tile with it. You’ll see cracking, soft spots, or water staining on the ceiling below. That’s when the real repair starts, and when you want someone who knows exactly which Quikrete product belongs where.
Which Quikrete Models This Applies To
Quikrete makes a full bathroom line: their standard sand/topping mix for pre-slope shower pans, their polymer-modified thinset mortar for shower walls and floors, their self-leveling underlayment for uneven Miami slab foundations, and their water-resistant cement board for tub surrounds. The product number matters because not every Quikrete mix is rated for wet-area substrate or direct tile bonding.
Here’s a compatibility gotcha most homeowners don’t know: Quikrete’s standard mortar mix is not the same as their polymer-modified thinset. Using plain mortar under large-format tile (anything 12×24 or bigger, which is what half of Miami wants now) leads to tile popping off within a year or two. The bag looks similar, but the bond strength is completely different. We check the actual product code on the bag or the original receipt before we quote. For OEM versus aftermarket: Quikrete doesn’t make tile or showers, so there’s no such thing as a “Quikrete OEM tile” to match. But their mortar and backer board specs matter, and we match those to the tile manufacturer’s requirements rather than guessing. For shower pans in particular, we’ll verify whether your original pan used Quikrete’s sand/topping mix at the correct slope. If it didn’t, we’ll rebuild it right.
Penhallow Remodeling Miami is an independent service provider and is not affiliated with Quikrete. We stock Quikrete products because they hold up in Florida’s humidity when installed correctly, and because we’ve seen too many failed showers built with whatever was cheapest at the big-box store.
Styles & brands we work with
Signs Your Quikrete Bathroom Remodeling Is Failing
- Tile feels hollow when you tap it. This means the thinset has debonded from the substrate. In Miami, it’s usually moisture that’s been soaking the backer board for years. The tile isn’t just loose; the wall behind it is likely compromised.
- Grout keeps cracking in the same joints. Movement is happening behind the tile. Cement board wasn’t properly fastened, or the substrate flexes when someone stands in the shower. Re-grouting alone will crack again in six months unless the underlying flex is fixed.
- Dark stains spreading around the shower base. Water is wicking up into the wall. This is mold, and the fix usually means removing the bottom two rows of tile, replacing rotted substrate, and re-waterproofing before re-tiling.
- Musty smell that doesn’t go away. The shower pan or drain assembly is leaking into the subfloor. In older Miami homes, especially in Coconut Grove, we find pans built without a proper pre-slope, so water just sits and rots whatever is below.
- Floor tile cracking near the drain. This usually means the shower pan wasn’t packed solid or the subfloor has rotted enough to flex. Continuing to use the shower will make the crack worse and drive water deeper into the structure.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A Quikrete bathroom remodel in Miami lands between $10,620 and $33,040 installed. Where your project falls depends on three things: how much of the existing substrate has to be ripped out and rebuilt, what tile and finish materials you select, and whether we’re repairing a failing shower or doing a full gut and remodel.
Here’s what that price includes: demolition and disposal of the failed materials, rebuilding the substrate with the correct Quikrete cement board or mortar bed, waterproofing, tile installation, grout and sealant, and plumbing and drain work. You get a written price before any work starts, not a verbal ballpark. If you’re only replacing a shower pan or a section of wall, the cost sits at the lower end of the range. A full bathroom tear-out with niches, bench, glass enclosure, and high-end large-format tile will push toward the top. We’ll give you a written number before the first tool comes off the truck. Give you a number first, then pick up the tools.
Every Quikrete bathroom remodel we do carries our 365-Day Done Right Promise, written on the quote and on your contract. If something fails inside that year, we come back and make it right at no charge. No service fee, no re-inspection fee, no runaround.
DIY or Call Us?
If you’re comfortable with a grout float and you’ve re-grouted before, you can handle small grout cracks or re-caulking a tub line. Those are surface fixes. What you shouldn’t do is open up a shower wall, cut out rotted studs, or attempt a shower pan rebuild. Once you expose framing, you’re into structural, waterproofing, and drain territory, and a mistake there leaks into the ceilings below and costs thousands more than the original repair would have.
Also, let’s be straight: Quikrete products are excellent, but their wet-area products require precise mixing ratios, correct cure times, and proper substrate prep. Most failed showers we see in Miami were DIY attempts or handyman jobs that skipped a step. If you tap your tile and it sounds hollow, if you see water staining, or if the grout keeps breaking, call (850) 988-7559. We’ll tell you what we find and put a written number in front of you before anything else happens.
FAQs
A properly built Quikrete shower or bathroom substrate should last 20 to 30 years in Miami’s climate, assuming the waterproofing was done right and the home doesn’t have foundation movement. The tile and grout on top will need maintenance, but the structure beneath should hold. If your current shower failed in under ten years, it was almost certainly a substrate or waterproofing error, not the Quikrete product itself. Call (850) 988-7559 and we’ll diagnose what actually went wrong.
Yes, we do partial repairs all the time. If the failure is limited to a shower pan, one wall, or the curb, we can repair just that section. The catch is that we won’t repair over rotten framing or bad waterproofing, because that fails again. We’ll tell you honestly if a partial repair makes sense or if you’re better off doing a full shower replacement. Either way, the price is written and the workmanship warranty applies.
Most bathroom remodels we handle in Miami take 2 to 4 weeks from demo to final grout, depending on scope, material lead times, and whether we find hidden damage behind the walls. A shower pan replacement alone is usually 3 to 5 days. We’ll give you a defined arrival window and a work schedule before we start, not after. Call (850) 988-7559 and we’ll walk through what your timeline looks like.
We keep Quikrete polymer-modified thinset, sand/topping mix, cement board, and waterproofing membrane on our trucks for common repair jobs. For full remodels, we order materials for your specific project so nothing sits in a Miami garage for weeks before install. If you need a specific Quikrete product matched to your existing setup, call (850) 988-7559 and we’ll confirm what’s needed and what we have before scheduling.
Written by Trevor Nash, Owner, Penhallow Remodeling Miami at Penhallow Remodeling Miami, serving Miami and nearby areas.
