Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Fence Installation: The Miami Owner’s Guide
Therma-Tru fence installation in Miami typically runs $4,130 – $10,620, with most residential jobs landing around $6,000 – $8,000 for a standard lot with steel-reinforced posts and Therma-Tru-compatible composite or vinyl panels. We can usually have a crew on site within 3 – 5 business days once we confirm the panel specs and post spacing. Most homeowners call us after a storm or a hard impact, when they notice a post leaning, a panel cracked at the rail, or a gate that suddenly won’t latch, and they want to know whether the fence can be saved or the section needs to come out.
If you’re staring at a sagging Therma-Tru fence line right now, here’s the short version: we stock the common post kits, rail brackets, and panel fasteners on the truck, and we’ll give you a written price before we touch anything. No verbal ballpark that changes at the door. Call (850) 988-7559 and we’ll walk you through what you’re looking at.
Which Therma-Tru Models This Applies To
Therma-Tru is better known for entry doors, but their outdoor living line includes fence systems built around the same fiberglass and composite formulations they use in their door slabs. The compatibility question that trips up most Miami owners is this: Therma-Tru fence panels are engineered for specific post profiles, and the rail brackets are not universal. If your fence was installed before roughly 2018, the post sleeves may be a smaller interior dimension than the current generation, and a new panel won’t seat correctly without a retrofit bracket. We check the post dimensions before we order anything, because bringing the wrong panel to a job in Cutler Bay or Kendall wastes your afternoon and ours.
You’ll find the model or series designation on a small sticker or embossed mark near the bottom rail of the panel, usually on the back face. If that’s faded or buried under a decade of Miami sun, we measure the panel thickness and rail profile instead. Therma-Tru’s composite fence line runs in two main thicknesses: 1.5-inch panels for decorative runs and 2-inch panels for privacy fences and wind-rated sections. The 2-inch panels are what we recommend anywhere east of US-1 or within a few blocks of Biscayne Bay, because the wind load is real and code in Miami-Dade requires specific post embedment and mechanical fastening that lighter systems can’t meet.
When a panel is no longer made, we source quality aftermarket equivalents that match the rail profile and color family closely enough that an 8-foot section blends without looking patched. For most Therma-Tru fence lines, we can match both the original Therma-Tru panel and a compatible replacement. We’ll tell you which one makes sense at your price point, and why.
Styles & brands we work with
Signs Your Therma-Tru Fence Installation Is Failing
- Leaning posts at the gate or corners. This usually means the post footer wasn’t deep enough for Miami’s sandy soil, or water has been pooling at the base and the concrete is cracking. A leaning gate post pulls the latch out of alignment, which is why the gate suddenly won’t close. This is the most common failure we see in Coral Gables and Pinecrest, where irrigation overspray keeps the soil soft year-round.
- Cracked or split panels near the bottom rail. Composite and fiberglass panels expand and contract with the heat, and Miami’s wet-dry cycles put constant stress on the rail joints. A hairline crack at the rail is usually the first sign the panel is binding against the post because the fasteners were over-tightened at install.
- Rattling or flapping in mild wind. If a fence section moves in a 15-mph breeze, the rail brackets have loosened or the fasteners have stripped. Left alone, that movement works the post out of its footer and turns a $200 bracket job into a full section replacement.
- White chalky residue running from the fasteners. That’s galvanic corrosion from mixing dissimilar metals, which Miami’s salt air accelerates. Once the fasteners start shedding, the panel loses its mechanical grip and the fence gets progressively weaker at every joint.
- Gaps appearing between panels and posts. Composite fences need expansion gaps. If a previous installer butted panels tight against the posts, the panels bow or crack in the first full Miami summer. We see it constantly in older Hialeah and Kendall installs done with the wrong gap spec.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Therma-Tru fence installation in Miami, you’re looking at $4,130 – $10,620 for a typical residential project. The low end covers a straight run of 50 – 75 linear feet with standard posts, basic panels, and clean digging conditions. The high end accounts for 150+ feet, gate rebuilds, wind-rated post footers in Miami-Dade, demolition and haul-away of the old fence, and access problems like tight side yards where every post hole is hand-dug.
What moves the number most: total linear footage, post depth and footer requirements (Miami-Dade code is stricter than Broward on embedment and mechanical post anchors), gate hardware condition, and whether the existing posts are reusable. We do not reuse rotted posts to save you money. We’ll show you the post when we pull it, and if it’s sound, we’ll tell you it can stay.
Every fence quote includes the full parts-and-labor breakdown, written down before work starts. You’ll see the panel cost, the post cost, the concrete, the hardware, the labor line, and the haul-away fee. The number we hand you is the number on the invoice. And like everything we do at Penhallow Remodeling Miami, the fence work carries our 365-Day Done Right Promise in writing: if something we installed fails inside that year, we come back and make it right at no charge. No service call fee, no re-inspection fee, no hand-wringing.
DIY or Call Us?
You can safely check a few things yourself before you call anyone. Walk the fence line and count the leaning posts. Press on the panels and feel for play at the rails. Look at the gate latch and note whether the post has shifted or the hardware has worn. None of that requires tools or puts you near anything dangerous.
Where DIY goes wrong is pulling a post out of a concrete footer in Miami’s coral rock and sandy fill without snapping the post or destabilizing the adjacent section. Also, the panel-and-rail system is not forgiving: if you drill new fastener holes that aren’t square to the rail channel, the bracket won’t seat and the panel will rattle from day one. And a fence that’s not set to Miami-Dade wind specs will be exactly what your insurance adjuster looks at after the next storm. If the fence shares a property line, we pull the survey and mark boundaries before we dig. That part alone saves more money than most DIY repairs cost.
If you want to hand the whole thing to someone who will show up when they said, give you a number before they pick up tools, and stand behind the work for a year, call (850) 988-7559. The estimate is free and the written price is yours to keep, whether you hire us or not.
FAQs
A properly installed Therma-Tru composite fence in Miami lasts 20 – 25 years, and the posts usually outlast the panels by 5 – 10 years because the fiberglass-and-resin composite resists rot but the rail hardware and panel joints take the brunt of the weather. Coastal salt air near the bay can shorten hardware life to 8 – 12 years without stainless fasteners. Call (850) 988-7559 and we’ll tell you what condition your specific fence is in and what’s worth replacing.
A hairline crack at the rail end can sometimes be stabilized with a reinforcement bracket, but a panel that has split through the face or across the top rail should be replaced, because the crack will keep propagating through every Miami heat cycle. We’ll give you the repair option if it’s structurally sound, and we won’t if it isn’t.
Most residential Therma-Tru fence installations in Miami take 2 – 4 days from first post hole to final gate adjustment, depending on linear footage, access, and how much of the old fence has to be demolished and hauled. We’ll give you a defined arrival window before we start, not a “sometime this week.”
We stock common post kits, rail brackets, panel fasteners, and gate hardware on the truck, and we order the specific Therma-Tru panel profiles and colors for your fence line the same day we give you the written estimate. We also work with replacement panel sources for discontinued series, and we can source KraftMaid, Cambria, and Silestone products for our other remodel work if you’re planning more than a fence.
Call (850) 988-7559 to schedule a free estimate on your Therma-Tru fence installation in Miami. As Trevor Nash will tell you: give you a number first, then pick up the tools.
Written by Trevor Nash, Owner, Penhallow Remodeling Miami at Penhallow Remodeling Miami, serving Miami and nearby areas.
