Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Miami?
Walk-in shower installation in Miami typically costs between $5,310 and $14,160 for a complete project in 2026. Most homeowners we work with in neighborhoods like Coral Gables, Coconut Grove, and Kendall land between $7,500 and $10,500 for a mid-range shower with a tiled surround, glass enclosure, and new fixtures. The final number depends on the size of the shower, whether you’re converting a tub or starting from scratch, and the materials you choose.
A quick note before we get into the numbers: this guide reflects what we actually see on job sites across Miami-Dade County, not national averages from a home-improvement blog. Labor rates, permitting requirements, and material logistics are different here than in, say, Ohio. If you want a written price for your specific bathroom, call (850) 988-7559 and we’ll schedule a free estimate.
Key Takeaways
- Typical Miami range: $5,310 to $14,160, with most projects falling between $7,500 and $10,500.
- Labor accounts for roughly 40-50% of the total, higher than the national average due to Miami’s construction demand and permit requirements.
- Expect 3-7 days of on-site work for a standard walk-in shower installation.
- Written pricing before work starts is the single best protection against cost overruns. Penhallow Remodeling Miami provides this on every project.
- Permits are typically required in Miami-Dade for any plumbing or waterproofing work. Budget $200-$800 depending on scope.
Walk-In Shower Installation Cost Breakdown (2026)
Here’s how a typical walk-in shower installation budget breaks down in the Miami market in 2026. These are real ranges we quote from, not vague estimates:
| Line Item | Typical Cost Range | Notes |
|---|---|---|
| Demolition & removal (old tub/shower, drywall, backer) | $590 – $1,180 | Higher if tile removal or old plumbing is involved |
| Plumbing rough-in (valve, drain, supply lines) | $825 – $1,770 | Depends on whether existing drain location works |
| Waterproofing & cement board substrate | $590 – $1,180 | Includes moisture barrier, curb, slope work |
| Tile & setting materials (walls, pan or floor) | $1,180 – $3,540 | Porcelain starts lower; natural stone and large-format tile run higher |
| Glass enclosure (frameless or semi-frameless) | $1,180 – $3,540 | Frameless is the big variable; Miami humidity favors treated glass |
| Shower pan / base | $470 – $1,180 | Prefabricated pans cost less; custom tiled pans cost more |
| Fixtures (showerhead, valve, trim, grab bar) | $590 – $1,770 | Brand matters: Moen and Kohler are our standard choices |
| Permits & inspection fees (Miami-Dade or city) | $200 – $825 | Required for plumbing and waterproofing changes |
Total project cost: $5,310 – $14,160. That’s the full range from a simple prefabricated-pan shower with basic tile to a larger custom walk-in with a frameless glass enclosure and premium fixtures.
Here’s what pushes you toward $5,310: a standard 3×4-foot shower footprint, an existing drain location that works without rerouting, porcelain tile in a standard size, a prefabricated or acrylic pan, and a semi-frameless enclosure. Here’s what pushes you toward $14,160: expanding the shower footprint, moving or reconfiguring plumbing, waterproofing around a window or bench, large-format or natural stone tile, a custom tiled pan, and a fully frameless glass enclosure. Demolition surprises matter too. In older Miami homes, we regularly find corroded supply lines or dry-rotted framing behind the old enclosure, and that adds time and material to the job. That’s part of why we put the price in writing before we open the wall, so you’re not paying for surprises you didn’t approve.
If you’re also considering a full walk-in shower installation with us in Miami, that page covers the process and what to expect from start to finish.
What Affects Walk-In Shower Installation Pricing in Miami
Six things move the number more than anything else in this market. Here they are in plain terms:
- Waterproofing requirements. Miami building code requires a waterproof membrane behind your tile, and in a humid climate that’s non-negotiable even if code didn’t demand it. We use cement board substrate (the moisture-resistant layer behind your tile) and a liquid or sheet membrane over it. Skipping this step saves $500 to $800 short-term and costs thousands in mold and framing damage later. We won’t skip it.
- Glass enclosure choice. Frameless glass is the most visible upgrade and the biggest single cost variable, running $1,500 to $3,500 in Miami depending on glass thickness, coating, and hardware finish. Semi-frameless brings that down to $700 to $1,400. Given the coastal humidity and hard water common in parts of the county, we recommend treated glass either way; it makes a real difference in how often you’re scrubbing.
- Existing plumbing condition. In older Miami neighborhoods like Shenandoah or Buena Vista, galvanized steel supply lines from the 1950s and 1960s are common, and they often fail when disturbed during a shower remodel. Replacing them can add $300 to $900. We tell homeowners this during the estimate walkthrough so the written price already reflects what we can see.
- Tile selection and layout. Standard 12×24 porcelain is the workhorse of Miami shower installs and keeps tile costs in the $4 to $8 per square foot range. Larger-format tiles (24×48) cost more in material and much more in labor because they’re heavier and require more careful setting. Natural stone tile starts around $9 per square foot and can go much higher. More intricate patterns add labor hours.
- Access and logistics. This one surprises people. If you live in a high-rise condo in Brickell, Edgewater, or along Biscayne Boulevard, material delivery and debris removal cost more because of elevator reservations, freight restrictions, and parking. Newer buildings with strict hours can add $400 to $1,000 in coordination costs. It has nothing to do with the shower itself and everything to do with getting material to your unit.
- Permits and inspections. Miami-Dade County requires permits for shower plumbing changes, and most municipalities in the county follow that standard. The permit itself is usually $200 to $500, and the inspection process adds time to the schedule. Any contractor who tells you to skip the permit is telling you to accept unpermitted work, which becomes a problem when you sell the home. We pull permits on every job that requires one.
Walk-In Shower Installation vs. Related Projects: Miami Price Context
Sometimes homeowners start by researching a shower and end up considering a larger scope. Here’s how walk-in shower installation compares to adjacent projects in the Miami market, so you can plan with real numbers:
- Walk-in shower installation: $5,310 – $14,160
- Tub-to-shower conversion: $4,130 – $11,800. Usually slightly less expensive because the footprint already exists and the drain location is fixed.
- Shower replacement (same footprint, new surfaces): $3,540 – $10,030. The most economical option when you’re keeping the existing layout.
- Small bathroom remodel: $5,900 – $14,160. If you’re doing the shower plus flooring, vanity, and fixtures in a smaller bathroom, this is the range.
- Full bathroom remodel: $10,620 – $33,040. For larger bathrooms with more premium materials, this is the right expectation.
These all use the same pricing basis we apply across Miami-Dade, so you can compare apples to apples. If you’re on the fence between a shower replacement and a full remodel, the difference usually comes down to whether the floor and vanity still work for you.
How to Save on Walk-In Shower Installation in Miami
There are honest ways to reduce the cost of a walk-in shower without cutting corners that will bite you later. Here’s what we tell homeowners at the kitchen table:
- Keep the drain where it is. Moving a drain is one of the fastest ways to add $700 to $1,200. If the layout works for you, keep it. We’ll tell you honestly whether moving it is worth the cost.
- Choose a semi-frameless enclosure. You keep the clean look at roughly half the glass price. You can always upgrade to frameless down the road; the opening and mounting points don’t change.
- Use 12×24 porcelain tile. It’s durable, easy to clean, and keeps both material and labor costs in the lower half of the range. Save the natural stone and large-format tile for the bathroom floor if you want a premium visual without multiplying the shower labor.
- Plan the scope during the initial estimate. The biggest cost driver we can control is scope change mid-project. A written price with a defined scope is the best cost-saving tool there is. That’s exactly what Penhallow provides before any work starts.
- Do the work in your home’s slow season. In Miami, demand dips briefly in late summer and early hurricane season when many homeowners defer interior projects. Scheduling then can mean faster availability. Pricing stays the same because we quote written numbers, not market surges, but the schedule is often more flexible.
If you want an exact written number for your bathroom, call (850) 988-7559. The estimate is free, there’s no obligation, and you’ll have a real price to compare against other quotes.
What Our Walk-In Shower Installation Includes
When you hire Penhallow Remodeling Miami for a walk-in shower installation, the written price includes the full scope, not just the most visible pieces. Here’s what you get:
- Demolition and disposal of the existing tub, shower, or enclosure, including haul-away from your property. We leave the job site clean at the end of every day.
- Plumbing rough-in and valve installation with fixtures from Kohler, Moen, or Delta. These are recognized trade brands with their own manufacturer warranties, which sit alongside our workmanship guarantee.
- Waterproofing system including cement board substrate and membrane, installed to Miami-Dade code and inspected.
- Tile and grout installation on the shower walls and pan, with your choice of tile from our suppliers or yours.
- Glass enclosure measured and installed after tile is set. We use treated glass suited to Miami’s humidity and water chemistry.
- Final walkthrough and cleanup so you know exactly what was done and what to expect going forward.
Every one of those steps happens with a background-checked, uniformed technician on site. You’ll know who is walking into your home, and a live person answers our phones 24/7 if you have a question during the project.
The 365-Day Done Right Promise: What It Means for Your Shower
Here’s the thing we want every homeowner to understand before signing anything: a walk-in shower is a waterproofing system, not just a tile surface. The work you can’t see is the work that matters most. That’s why the guarantee matters more than the price tag.
Penhallow Remodeling Miami operates under the Kingswell Guarantee, which has set the standard for written pricing and written promises since 2004. Every project includes the 365-Day Done Right Promise: if anything fails inside the guarantee period due to our workmanship, we come back and fix it at no charge. That’s in writing, on every job, not spoken as a verbal assurance. If a repair is needed and it fails again, the return visit is free too. No service call fee, no re-inspection fee, no fine print. That’s The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it.
Trevor Nash, who leads Penhallow Remodeling Miami, put it this way on a recent job in Coconut Grove: “If I wouldn’t put my name on the written guarantee, I won’t put my crew on the job.” That’s the standard.
FAQs – Walk-In Shower Installation Cost in Miami
How much does a walk-in shower cost in Miami in 2026?
A walk-in shower installation in Miami costs between $5,310 and $14,160 in 2026, with most homeowners spending $7,500 to $10,500. The range reflects differences in shower size, tile selection, glass enclosure style, and whether plumbing needs to be reconfigured. Call (850) 988-7559 for a written quote on your specific bathroom; estimates are free.
Is it cheaper to install a walk-in shower or replace a bathtub?
Converting a tub to a walk-in shower costs $4,130 to $11,800 in Miami, while a full walk-in shower installation runs $5,310 to $14,160. The tub-to-shower conversion is often slightly less expensive because the footprint and drain location already exist. A like-for-like shower replacement is even more economical at $3,540 to $10,030. The right choice depends on your bathroom and your needs, not just the price tag.
How long does walk-in shower installation take in Miami?
A standard walk-in shower installation takes 3 to 7 working days in Miami, depending on scope, tile complexity, and whether permit inspections affect the schedule. Demolition is typically one day, plumbing and waterproofing two to three days, tile setting two to three days, and glass enclosure measurement and installation a week or so after tile is complete. We’ll give you a defined arrival window for each phase.
Do I need a permit for a walk-in shower installation in Miami?
Yes, Miami-Dade County requires permits for shower plumbing changes and waterproofing work. Permit and inspection fees typically add $200 to $825 to the project. A contractor who suggests skipping the permit to save money is setting you up for problems when you sell the home. Penhallow Remodeling Miami pulls permits on every job that requires one.
What makes walk-in shower installation more expensive in Miami than in other markets?
Labor rates in Miami run higher than the national average due to construction demand, and the humidity here makes waterproofing code requirements stricter than in drier climates. Material logistics for condos and gated communities add cost for delivery and debris removal, and Miami-Dade’s inspection process adds schedule time. The tradeoff is work built to withstand the climate, which matters for a shower.
Can you install a walk-in shower the same week I call?
Scheduling depends on the season and current project load. In slower periods, we can often start within a week or two of a signed estimate. Call (850) 988-7559 and a live person (not an answering service) will tell you real availability for your area of Miami.
Get a Written Price for Your Walk-In Shower in Miami
If you’re considering a walk-in shower for your home in Miami, Coral Gables, Coconut Grove, Kendall, Doral, or anywhere else in Miami-Dade County, the next step is simple. Call (850) 988-7559 and we’ll schedule a free in-home estimate. You’ll get a written price before any work starts, a defined arrival window, and a written 365-Day Done Right Promise on the project. That’s the Kingswell standard, and it’s how we’ve done business since 2004.
Start with the home services overview or go directly to Walk-In Shower Installation in Miami to learn more about the process.
Pricing reflects the Miami market as of 2026. Penhallow Remodeling Miami offers free estimates – call (850) 988-7559.
Written by Trevor Nash, Owner at Penhallow Remodeling Miami, serving Miami since 2004 under The Kingswell Way.
What Our Customers Say
"Redid two bathrooms at once. The crew protected the floors and cleaned up every single day before leaving. Quote was detailed and there were no mystery charges at the end."
- Tricia Dawson"Full home refresh before we sold. They were straight about what was worth doing and what wasn't to get our money back. On time, on budget, and it sold in a week."
- Monica Vaughn"Full kitchen down to the studs. The written estimate held and they finished on the day they promised. Crew was tidy and polite the whole month. Rare to find."
- Vernon Askew
